The Top 10 In Action Sports
016 Terrifying Shark Attack Near-Misses
02The ASP World Tour of Surfing Stop 3 : The Rip Curl Pro, Bells Beach Australia
03Freediver Descends To World Record Breaking Depth Of 101m
04Heat Map of the World's Best Surf Spots
05New World Record: Skydiving With World's Smallest Parachute
06Kevin Windham Wanted to Wow the Crowds With This Monster Transfer Gap. Then This Happened...
07Ever Seen A Horse Skateboarding? It's Actually Properly Impressive!
08Pietermaritzburg World Cup: How the Men's Winning Runs Compare
096 Mistakes Every Beginner Surfer Makes
1020 Worst Snowboard Slams Ever!
Filmed/Edited: Phillip Long
Featuring Zig Short
AO scooters are the first decks specifically designed for street. Key innovation of the deck is a removable grind and nose blunt plate which is made of a super tough plastic material which not only protects your deck but enables you to effortlessly grind anything: unwaxed curbs, concrete and stone ledges, wood and it even gives you more control on metal rails.
The grind plate adds significant strength to the deck and opens a whole new dimension in scootering and you don't depend on someone to drive you to a skate park: Now you can ride your scooter on curbs, ledges and rails right in front of your door steps -- anytime, anywhere.
The AO Epsilon deck is made of re-heat treated 6061 T6 aluminum in one of the world's leading BMX factories. The slightly concave deck is 4 ½" wide (115 mm) and features a completely flat bottom to maximize the grinding area. It comes in 3 lengths (19 ½", 20 ½" and 21 ¼") and weighs 3.8 lbs. (1.6 kg). It comes with stainless steel flex brake (rounded so your wheels won't get flat), 8 mm high tensile Chromoly axle bolts (12.9 grade) and a grind plate made of super tough Nylon material.
Epsilon Deck Features:
- Deck in re-heat treated 6061 T6 aluminum
- Fully integrated system (HIC)
- Flat bottom
- Super tough grind plate
- Nose blunt grind plate
- Rounded, stainless steel flex brake (2 mm)
- 8 mm high tensile Chromoly axle bolt (12.9 grade)
- Length: 20.5" (520 mm), width: 4 ½" (115 mm)
- Head tube angle 82.5
AO Epsilon Fork
This lightweight, super strong fork is forged from a block of aluminum under 5 tons of pressure. This process re-aligns the molecules and makes it so dense that it is 2.5 times stronger than regular machined aluminum.
Fork type: Threadless
Bar type: oversized
Compatible with: Lucky HIC, SCS, iHIC compression systems
Wheel diameter: 100mm, 110mm
Wheel profile: Flat, Narrow
Fork design: One-piece, forged
Material: Aluminum 6061 T6
Fork length: 7" (178 mm)
Wheel offset: 10mm
Axle: high tensile Chromoly (12.9 grade)
Axle type: M5, Lock nut,
Frame Spacer type: Built-in
Starnut system: Built-in thread (closed top)