The Top 10 In Action Sports
016 Reasons Why You Should Be Proud To Be A British Surfer
025 Reasons The Colorado Freeride Festival Was Absolutely Awesome!
03Is This New Suit The Most Ridiculous Piece Of Cycling Gear Yet?!
04Surfer Killed In California After Being Struck By Lightning
05Can You Make It Through This Gallery?! These X-Rays And Stitches Are Gnarly As Hell!!
06The Pushy Parent's Guide To Raising A Future Pro Cyclist
07Afghanistan May Be Best Known As A War Zone, But That Didn’t Stop These Mountain Bikers…
08This Back Garden Set Up Is Absolutely Insane! Is This BMX Paradise?!
09You Thought Selfies Were Bad? This Is What They're Getting Up To In New Zealand
10The 5 Clichéd 'Truths' You Should Avoid When Buying a Mountain Bike
Filmed/Edited: Phillip Long
Featuring Zig Short
AO scooters are the first decks specifically designed for street. Key innovation of the deck is a removable grind and nose blunt plate which is made of a super tough plastic material which not only protects your deck but enables you to effortlessly grind anything: unwaxed curbs, concrete and stone ledges, wood and it even gives you more control on metal rails.
The grind plate adds significant strength to the deck and opens a whole new dimension in scootering and you don't depend on someone to drive you to a skate park: Now you can ride your scooter on curbs, ledges and rails right in front of your door steps -- anytime, anywhere.
The AO Epsilon deck is made of re-heat treated 6061 T6 aluminum in one of the world's leading BMX factories. The slightly concave deck is 4 ½" wide (115 mm) and features a completely flat bottom to maximize the grinding area. It comes in 3 lengths (19 ½", 20 ½" and 21 ¼") and weighs 3.8 lbs. (1.6 kg). It comes with stainless steel flex brake (rounded so your wheels won't get flat), 8 mm high tensile Chromoly axle bolts (12.9 grade) and a grind plate made of super tough Nylon material.
Epsilon Deck Features:
- Deck in re-heat treated 6061 T6 aluminum
- Fully integrated system (HIC)
- Flat bottom
- Super tough grind plate
- Nose blunt grind plate
- Rounded, stainless steel flex brake (2 mm)
- 8 mm high tensile Chromoly axle bolt (12.9 grade)
- Length: 20.5" (520 mm), width: 4 ½" (115 mm)
- Head tube angle 82.5
AO Epsilon Fork
This lightweight, super strong fork is forged from a block of aluminum under 5 tons of pressure. This process re-aligns the molecules and makes it so dense that it is 2.5 times stronger than regular machined aluminum.
Fork type: Threadless
Bar type: oversized
Compatible with: Lucky HIC, SCS, iHIC compression systems
Wheel diameter: 100mm, 110mm
Wheel profile: Flat, Narrow
Fork design: One-piece, forged
Material: Aluminum 6061 T6
Fork length: 7" (178 mm)
Wheel offset: 10mm
Axle: high tensile Chromoly (12.9 grade)
Axle type: M5, Lock nut,
Frame Spacer type: Built-in
Starnut system: Built-in thread (closed top)