Thankfully, we've produced this easy-to-understand guide to attaching trucks and setting them up to talk you through the basics.
How to Build a Skateboard: Attaching Your Trucks
Once you've put grip tape on your new deck, the first step is to mark it so you put the bolts through in the right place. The best way of doing this is to push the bolts through from the bottom, scoring the tape. Then flip the board over and use an alan key to push holes through the grip tape.
"If you the kingpins are facing out, your board will turn the opposite way to the way you're leaning."
then put the truck bolts through, and mount the trucks with the kingpin facing inwards. This is very important, if you the kingpins are facing out, your board will turn the opposite way to the way you're leaning. You can then tighten up the truck bolts. If you have a bolt of a different colour, the norm is to use it to mark the front end of your board.
How to Build a Skateboard: Adjusting Your Trucks
Setting your trucks up correctly is important - too loose and you'll wobble, too tight and you'll struggle to turn. Trucks are tightened or loosened using the kingpin, and you'll need a skateboard tool to adjust them.
Outside of the extremes, how tight your trucks are is a matter of personal preference, and it's worth trying a few different settings to see what suits you best.